Clever Choice Auto-Code Pro Uživatelský manuál Strana 31
- Strana / 48
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
31
METER MEMORY
Reviewing Test Results
Your meter stores 450 the most recent blood glucose test results
along with respective dates and times in meter memory. To enter the
meter memory, start with the meter switched off.
1. Press and release
.
will appear on the display. Press again, and
the rst reading you see is the last blood glucose
result along with date, time and the measurement
mode.
2. Press
to recall the test results stored in the
meter each time you press.
3. Exit the meter memory
After the last test result, press
again and the
meter will be turned off.
If the meter is left idle for more than 5 seconds
after entering the memory mode, the meter then
will display the following message on the LCD.
This indicates that you can insert a test strip and
initiate a blood glucose test.
NOTE
- Read instructions before use 1
- For self-testing 1
- OWNER'S 3
- IMPORTANT SAFETY PRECAUTIONS 5
- READ BEFORE USE 5
- TABLE OF CONTENTS 6
- BEFORE YOU BEGIN 8
- Intended Use 9
- Test Principle 9
- Contents of System 10
- Meter Overview 11
- Screen Display 12
- Test Strip 13
- Setting the Meter 14
- THE FOUR MEASURING MODES 18
- CONTROL SOLUTION TESTING 19
- TESTING WITH BLOOD SAMPLE 22
- Preparing the Puncture Site 24
- Alternative Site Testing 26
- METER MEMORY 31
- DOWNLOADING RESULTS ONTO A 34
- COMPUTER 34
- MAINTENANCE 35
- BATTERY 36
- Caring for Your Meter 37
- Caring for Your Test Strips 37
- SYSTEM TROUBLESHOOTING 39
- Error Messages 40
- Troubleshooting 41
- DETAILED INFORMATION 42
- SPECIFICATIONS 45
Související produkty a manuály pro Měření, testování a kontrola Clever Choice Auto-Code Pro
(56 stránky)Electrolux EN3489MFW manuals
Owner’s manuals and user’s guides for Unknown Electrolux EN3489MFW.
We providing 2 pdf manuals Electrolux EN3489MFW for download free by document types: Information Sheet, User Manual
Komentáře k této Příručce